The Jensen Heavy Duty Mechless Marine Stereo # JHD40BT is a great choice for your tractor. This unit is IPX6 rated and features an internal conformal-coated circuit board which is a fancy way of saying it has a protective polymer coating that conforms to the circuit board's surface to seal out high humidity and other harsh elements.
You can use # VOSHD4MNT mounting base/bracket (sold separately) to easily install the stereo on most flat surfaces with the included M4 screws.
The Jensen... view full answer...
Yes, I can help you out to an extent with the installation. Since I do not know what stereo you currently have in your boat, I cannot say whether the Jensen Heavy-Duty Mechless Marine Stereo # JHD910BT will wire up the same way.
I have included a picture of the wiring diagram and included the installation instructions. You can use these to help determine if the Jensen # JHD910BT stereo will work out well in your really nice boat.
If you are worried about the installation, I recommend... view full answer...
The Jensen Heavy Duty Mechless Marine Stereo part # JHD916BT is Bluetooth compatible therefore you can use your phone (iPhone/Apple) to play music through the stereo. I have attached a photo below of the first page in the manual which goes over the Bluetooth operation. view full answer...
I assume you are referring to the Jensen Marine Amplified Subwoofer part # JMPSW800. If that is the case then I have attached the correct wiring diagram for you. There are a set of red/white RCA cables that will go to a stereo like the Furrion Stereo part # DV3100 and then a set of three wires; one for power, ground, and remote. The power wire will need to be attached to the vehicle's 12 volt battery with a 10 amp fuse placed within 18" of the positive terminal. The ground wire can be ran... view full answer...
The Rockford Fosgate Marine Remote with Display # 292-101475 uses an 8 pin style of connector which is common for this type of stereo. view full answer...